|
|
|
| | Electrical specifications
| Model |
MN-1 |
MN-2
|
| The length (m) of the panel antenna to be fixed |
up to 1 |
above 1
|
| The width (mm) of the antennas to be fixed |
up to 350 |
above 350
|
| The tilt angele, degrees |
15 |
9
|
| The capability of the mounting on a wall |
available
|
| The techniques for the mounting on a mast |
clamp "norma" |
|
| CP-55D (mast 25-55 mm)
|
| CP-115 (mast 60-115 mm)
|
| |
CP-220 (mast 115-220 mm)
|
|
|
| |
For mechanical correction of the radiation pattern of sector antennas we propose special gears being manufactured by our company and made of steel of 2 and 4 mm thickness by means of the pressing technique. The metal is protected by a zinc coating. These gears allow to tilt the antenna by 0 to 15 degrees (depending upon the length of antenna).
The tilt gears parameters are given in the Tables 1 and 2.
The antennas with the tilt gears can be installed at the plane surfaces (wall) or at the mast of diameter up to 220 mm.
| |
|
 |